To extend the service life of the flat gate valve, the following aspects shall be carried out:
Regular inspection: regularly inspect the flat gate valve, including appearance, sealing parts, motor, reducer, transmission mechanism and other parts, to ensure that it works normally without abnormality.
Cleaning: regularly clean the flat gate valve to remove the debris and dirt inside and ensure its normal operation. Disconnect the power supply and take corresponding safety measures during cleaning.
Lubrication maintenance: in the process of use, it is necessary to regularly carry out maintenance operations such as oil filling and oil change for the lubricating parts of the flat gate valve, so as to ensure smooth operation and avoid failures due to wear of the parts.
Price of flat gate valve
Replacement of wearing parts: regularly replace the wearing parts in the flat gate valve, such as seals, springs, etc., to ensure their normal operation. If obvious damage or aging signs are found on vulnerable parts, they shall be replaced in time.
Anti-corrosion coating: for occasions with corrosive media, it is necessary to regularly check the coating on the surface of the flat gate valve for damage or corrosion, and repair and replace it in time.
Safety management: in the process of use, it is necessary to strictly abide by the operating procedures and safety operation requirements to ensure the safety of operators. Meanwhile, the flat gate valve shall be subject to regular safety inspection to eliminate potential safety hazards.
Routine maintenance: in daily use, it is necessary to frequently check the working state of the flat gate valve, including whether there is abnormal sound and whether there is water leakage, etc. At the same time, keep the environment dry and well ventilated to avoid the impact of moisture and dust on the valve.
Storage mode: when the flat gate valve is not used, it shall be stored in a dry and ventilated room, and the storage environment shall be clean and dry. When stored for a long time, the valve shall be checked regularly for abnormalities.
To sum up, the maintenance of the flat gate valve to extend the service life requires attention to many aspects, including regular inspection, cleaning, lubrication maintenance, replacement of vulnerable parts, anti-corrosion coating, safety management, daily maintenance and correct storage methods. Only comprehensive maintenance can ensure the normal operation and extend the service life of the flat gate valve.
